
Paver sealing for Bloomingdale homes
Paver Sealing in Bloomingdale, FL
Bloomingdale pavers near the Alafia River grow green and lose color, so call (656) 254-3471 for a free estimate.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Fast, careful paver sealing in Bloomingdale
Bloomingdale homeowners can get paver sealing from a local contractor, and the estimate is free. Expect work on driveways, front entries, pool decks and lanai floors, from streets near the Alafia River to blocks by Bloomingdale High School. Reach out and an answer comes within 1 business day, usually much sooner, so ask for a free estimate and give your street name.
Picture the walk to your front door. A green film sits in the shaded corner, weeds crowd two seams and the color has faded where the sun lands. After a wash, a fresh fill of sand and a new coat, the whole walk reads as one clean color from the street. If you would like to talk about your own pavers before anything is booked, call (656) 254-3471.

Why hire a local paver sealing contractor in Bloomingdale?
Bloomingdale grew from a settlement before 1850 into a Tampa bedroom community, so its pavers come from many different decades. A local contractor can work out what you have when you ask for a free estimate.
Free look, free price
A contractor reviews your Bloomingdale pavers and names a price at no charge. You owe nothing for asking.
A settlement before 1850
Bloomingdale grew from a settlement into a Tampa bedroom town, so pavers vary by decade. A local contractor reads each street's history.
A finish that fits
A matte finish stays natural and forgiving, while wet look brings out depth but shows wear sooner.
Reply within a day
Expect an answer within 1 business day, often sooner. The date and the finish stay yours to set.
Get Your Free Estimate in Bloomingdale
Tell us about your pavers in Bloomingdale.
Free, no obligation

What paver problems show up most in Bloomingdale?
Algae on the river side of town
Bloomingdale's southern edge is the Alafia River, where the Bell Shoals rapids run and Hillsborough County protects about 4,070 acres in the Alafia River Corridor Nature Preserve. Streets near that much habitat carry more humidity and more shade. After a rain, pavers there can stay wet into the afternoon, and algae takes hold on steps and north-facing walks. It looks like a green or black skin and makes a surface slick. Sealer cannot go over it, so the wash always leads. Pool edges and steps are worth treating first because wet algae is slick underfoot. Hillsborough County says the preserve includes land once mined for phosphate, a reminder of how much the ground along the river has changed. Jules Verne placed the fictional moon launch of From the Earth to the Moon on bluffs around what is now Bell Shoals Nature Preserve.
Seams that empty after storms
Think of a Bloomingdale drive as a long slope with a lot of narrow seams. When a downpour comes, water runs along the slope and drags sand along with it. Florida's state soil, Myakka fine sand, drains fast, so the ground offers no help holding anything. By the end of the wet season the lowest feet of the drive can look hollow. Weeds root in those gaps. The cure is fresh sand before the coat. Grass edges lose sand first, since roots and mower wheels push it out. Sweeping new sand in after the wash is part of the job rather than an extra. The Barnes family and other settlers made their homes around Bell Shoals after the Second Seminole War, and the Bell Shoals Road bridge now crosses the river there. Bloomingdale covers about 8.4 square miles at an elevation near 62 feet, and its 22,947 residents live in 8,069 households, so most paver work is on ordinary residential lots with a drive, an entry and sometimes a deck.
A rust fan from the sprinkler
At a Bloomingdale home the sprinkler heads nearest the walk are the usual suspects. The University of Florida's Florida-Friendly Landscaping program notes that most Florida wells carry iron and that iron-rich irrigation water streaks exteriors orange. The result is a rust-colored fan on the pavers that comes back after every cycle. A plain wash may leave it behind. A treatment ahead of the coat deals with it, and a small turn of the head stops a repeat. If you are on a well, say so on the first call. Bloomingdale School trained an average of 54 teachers at a time from 1897, and Bloomingdale High School and Mulrennan Middle School are the schools there today.
Color that has gone flat
Many Bloomingdale driveways face the sun all afternoon, and summer highs across Tampa average about 91 degrees. Concrete pavers lose depth of color and take on a chalky look, most of all in the lane under the tires. A good wash shows what is left, and a fresh coat brings the tone forward again. A west-facing drive shows it as a wide band at the end of the day. Faded color is surface wear rather than damage. D.J. Galvin's feed store once stood where Mulrennan Middle School is now.
A street built in pieces
Bloomingdale was a settlement before 1850 and grew up slowly, then became a bedroom community for Tampa from the 1960s on. A single street may hold homes from several of those chapters. Each owner paved or re-paved on their own schedule, with their own sealer. That is why a contractor here tests a small patch first. A water-based sealer cannot go over a solvent-based one, and a border laid in another style may take sealer differently. The 2020 Census counted 8,069 households in Bloomingdale, and about 35.9 percent had children under 18. Bloomingdale School was founded in 1884, the post office closed in 1910 and the school closed in 1920, a long history that shows in the mix of homes and the mix of pavers on one block.
Do the streets near the Alafia River need different paver care than the rest of Bloomingdale?
Often they do, because river air and shade keep pavers damp for longer. The Alafia River forms Bloomingdale's southern edge, with the Bell Shoals rapids on that stretch of water. Pavers close to the river grow green sooner and need a careful wash before any sealer goes down. Let the contractor know how close you are when you ask for a free estimate.
Bloomingdale lies between Brandon to the north, Valrico to the northeast, FishHawk to the southeast and Riverview to the southwest. With 8,366 housing units counted in 2020, driveways and entries are the main paver areas, and pool decks and lanai floors are common extras. Each of those surfaces ages a little differently, so the contractor handles them one at a time. Call (656) 254-3471 and list the ones you have.
Bloomingdale High School and Mulrennan Middle School anchor the community's center, and Mulrennan stands where an old feed store once stood. Homes around them were built across several decades, so pavers vary in age and in past coatings. A block near the schools may hold more variety than a newer street farther out. Mention the age of your home when you ask for a free estimate, and the contractor can plan the wash and the sealer around it.
What does paver sealing cost in Bloomingdale?
Companies serving Tampa Bay list $1.25 to $2.50 per square foot for cleaning, sand and sealer. In Bloomingdale, old sealer, empty seams and algae decide where you land. A pool deck or second patio adds area, and the total grows even when the rate holds. For a number on your pavers, ask for a free estimate, and you will have a written price to compare.
River-side shade can add washing time, and a rust stain adds a treatment step. A clean sunny drive with sand still in the seams sits near the low end. The contractor lists each area with its price, so nothing has to be decided that day and you can weigh the parts. To go over the numbers together, call (656) 254-3471.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $375 to $750 |
| 600 sq ft | Two car driveway | $750 to $1,500 |
| 1,000 sq ft | Large driveway or pool deck | $1,250 to $2,500 |
| 1,500 sq ft | Driveway plus pool deck | $1,875 to $3,750 |
Math based on the $1.25 to $2.50 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

How does a paver sealing job work in Bloomingdale?
The first visit
Someone comes out to look at the drive, the entry and the deck, and measures each one. Sun, shade, sprinkler heads and stains go in the notes, and phone photos sent ahead save time, especially of the shaded side of the house. You hear a price for each surface and a plan for the order of work before you decide anything, and you learn whether any pavers need a reset.
The wash
Pressure clears algae, dirt and old residue from the faces and the seams. Algae is lifted before anything else, since sealer would lock it in, and rust and oil get a treatment first. Homes near the river side of the area may need a second pass on shaded steps, and steps and pool edges are washed with extra care. Wash water stays off the house wall and the beds, and you hear how long drying will take.
The refill
With the surface dry, new sand is swept in until every seam is full, and loose sand is cleared off the faces so it will not sit under the coat. A full seam locks pavers together, which is why this stage is not rushed. Sunken pavers are marked for a lift and reset before the sealer goes down. On older Bloomingdale lots, a newer border or apron may take sand differently, and that is noted.
The coat
A test patch shows the finish you chose, and a spot behind a planter keeps that check out of sight. Then the coat goes on by spray and roller, working so nobody steps on wet sealer. Edges beside the lawn, the house and the plants are protected, and lanes worn by turning tires may be given a second thin coat.
The last look
Feet and tires stay off while the coat sets, and the contractor tells you the wait. You walk the job together and any thin spot gets another pass. The product name goes in your records, along with a date to check the pavers again, and a home near the river side should ask for a check after the first wet spell.
Complete paver services in Bloomingdale
Four jobs make up a Bloomingdale sealing visit: wash, dry, sand, coat. Each waits for the one before it, which is why drying time matters so much near the river. The contractor can explain the order for your lot and how long each part is likely to take. To plan it for your home, ask for a free estimate.
Common surfaces here are drives, front walks, pool decks and lanai floors. Open sun fades concrete, and shaded corners go green. Different parts of one home may need different care, so the contractor may handle each area on its own. Call (656) 254-3471 and list what you would like done.
As for finish, matte keeps the color natural and a wet look makes it pop, though wet look picks up scuffs sooner. A solvent-based coat underneath rules out water-based sealer on top, so the old coat is checked first. A test patch lets you judge both in daylight. To compare finishes, ask for a free estimate.
Afternoon rain sets the pace in the wet months, which run from late May until early October. Starting in the morning gives the pavers time to dry before the coat goes on. Keep cars and feet off until the contractor says the coat is ready. Choose a date, then (656) 254-3471 to confirm it.
Questions to ask before you hire
- Is there a minimum charge for a small patio?
- Do you ask for a deposit, and when is the balance due?
- Do you strip old sealer that has turned cloudy or peeled?
- Will you write the sealer name and the number of coats on the estimate?
- Can you test a small spot first so I can see the finish?
- How long should I wait before sealing again?
- Does your quote count the lanai and the pool deck as separate areas?
What do sealed pavers look like around Bloomingdale?









Why local matters in Bloomingdale
A contractor who works Bloomingdale knows the area sits between Brandon and Riverview and runs down to the Alafia River. That helps in planning a day and in knowing which streets stay damp after rain. Someone driving in from another county would be guessing at both. Call (656) 254-3471 to speak with a contractor who knows the area.
Local work also means reading a mixed neighborhood. Bloomingdale grew over many decades, so one block may hold work from different years and different sealers, and the contractor tests before choosing a product. That small step saves a peeling coat later. To tell a contractor when your home was built, ask for a free estimate.
The calendar matters as well. Summer thunderstorms are routine here, and sealer needs a dry surface, so contractors favor early starts that give the pavers a full dry day. To sort out timing for your Bloomingdale pavers, ask for a free estimate.
What is the story behind Bloomingdale?
It began as a settlement before 1850, when families such as Vickers and Carney arrived. Bloomingdale School opened in 1884 and became a teachers' institute in 1897, training an average of 54 teachers at a time, with students coming from Gainesville to Miami-Dade County. The railway went through Brandon in 1890 instead, and the school closed in 1920. If you live near the old center of Bloomingdale, ask for a free estimate.
The community held steady for decades and became a bedroom community for Tampa from the 1960s. Bell Shoals are rapids on the Alafia River, American settlers including the Barnes family settled near them after the Second Seminole War, and the Bell Shoals Road bridge crosses the river there. Hillsborough County protects about 4,070 acres along the river in the Alafia River Corridor Nature Preserve. Near any of these Bloomingdale landmarks, call (656) 254-3471.
Frequently Asked Questions
How much does it cost to seal pavers per square foot in Bloomingdale?
Bloomingdale quotes should land between $1.25 and $2.50 per square foot for cleaning, sand and sealer, the range posted around Tampa Bay. A Bloomingdale job lands inside it based on old sealer, missing sand and algae. A pool deck or second patio adds area. Have the quote itemize each surface so the money is easy to follow. Free estimates carry no obligation. Many Bloomingdale lots have a drive, a walk and a deck, each on its own line. A Bloomingdale lot can hold a drive, a walk, a lanai and a deck, each with its own area. Many lots here have a drive, an entry and a deck, each priced separately.
What should I clean pavers with before sealing?
A pressure wash starts things off, with a cleaner for rust, oil or green growth. The pavers must then dry fully, since sealer needs a dry surface. The contractor chooses what suits each Bloomingdale surface and tells you how long drying will take. Pavers near the river side may need a milder first wash.
What are the downsides of sealing pavers?
No coat lasts forever, and a wet look will scuff before matte does. A rainy week can move the date because the pavers must be dry. A coat that is already down also limits what can go on top of it. Upkeep comes with the territory when you want richer color and fewer weeds. That upkeep is easier to plan when you know the date of the last coat. Weigh that upkeep against the time saved on scrubbing and weeding.
Is it better to spray or roll paver sealer?
Both are common: a spray pass spreads product evenly, and a roller works it into the seams. Ask your contractor how the coat goes on, and confirm the pavers are dry first so the finish stays clear. A second thin pass on worn lanes is common.
How often should pavers be resealed in Florida?
Expect two to five years between coats, as companies quote. Drives in full sun and busy pool decks are at the short end of that range, and a shaded walk can use an earlier check for algae. When water soaks in instead of beading, the coat is worn thin.
Does the Alafia River make Bloomingdale pavers dirtier?
Homes near the river see more shade and damp air, so algae shows up sooner on pavers there. A wash lifts it, but the pavers must be fully dry before sealing. Let the contractor know how near the river sits to your home. Ask whether your street sits close enough to the river to count as damp.
Will my sprinklers stain pavers in Bloomingdale?
They can. The University of Florida's Florida-Friendly Landscaping program says irrigation water high in iron leaves orange streaks, and most Florida wells carry iron. Tell the contractor how your yard is watered so rust is treated before the coat. Sealer does not cover rust. A moved sprinkler head stops repeat stains.
Does sealing help with weeds between Bloomingdale pavers?
It helps, because packed joints under a sealed face give weeds little room to root. Fresh sand goes in before the coat. A sealed surface is still not weedproof, so check the joints each season. Existing weeds come out during the wash. Weeds near the lawn edge are the ones to watch.
Can sealing bring back color on a faded Bloomingdale driveway?
It can bring back much of the color once the surface is washed. Matte reads as natural, while wet look reads as richer. Ask for a small test patch so you can compare them before you decide. A matte finish suits a quiet front walk.
Why do Bloomingdale pavers vary so much in age?
Bloomingdale was a settlement before 1850 and became a bedroom community for Tampa from the 1960s, so its homes were built across many decades. Each owner paved on their own schedule. A contractor tests a small patch before choosing a product, since the coat underneath may differ from a neighbor's.
Does living near Bell Shoals or the Alafia River change what a contractor does?
It can add washing time. The Alafia River forms Bloomingdale's southern border, and shaded, humid pavers grow algae sooner. The pavers still need to be fully dry before sealing, so the contractor may plan a longer day for riverside lots.
Which parts of Bloomingdale can a contractor reach?
Bloomingdale sits between Brandon, Valrico, FishHawk and Riverview, with Bloomingdale High School near its center and the river on its southern edge. Give your street when you ask for an estimate, and the contractor will explain what a visit involves.
Nearby areas we serve
Ready for a Free Estimate in Bloomingdale?
Call (656) 254-3471 and tell us about your pavers.
Free, no obligation
